Monday, September 7, 2009

A Beeping Computer


Should something go wrong during the boot process that prevents the computer from even sending data to the monitor or starting the computer, you need some way to identify the problem. When something goes wrong that causes the BIOS to be unable to start the computer properly, it uses specific patterns of beeps to give you clues to what the underlying problem is.
New hardware. It’s easy to accidentally bump something while working inside a computer. Retrace your steps and ensure everything is firmly in place. Reboot your computer. If the beeping continues, remove the new hardware and see if the beeping goes away.
Beep codes. There aren’t any standard beep patterns. To make sense of the beeps, you first need to identify your BIOS. The documentation for your motherboard likely contains this information. With this data in hand, search online for the meanings behind the beeps. Many sites offer such information.
Defective components. If your problem persists, it’s time to look at replacing the troublesome component. If your beep codes indicate that the RAM is failing, you might need to first figure out which module in particular is the problem, because most computers have more than one memory module installed. Depending on how old the computer is, you should be able to take out the memory modules one at a time and reboot the computer to see if the problem goes away; doing so will identify the problematic stick of RAM. If your video card is the problem, swap it out with a new one and see if the problem continues. Make sure that the video card you choose to troubleshoot or replace yours with is compatible with your motherboard and your operating system— otherwise, you will only create new problems.
For troubleshooting purposes, it is helpful to have another computer you can borrow parts from. It is best to work through the troubleshooting and be fairly confident of your diagnosis before you run down to the local computer retailer and start buying replacements. If the new parts don’t fix the problem, you may be stuck with parts you can’t return.

No comments:

Post a Comment